下載電子全文宣告This thesis is authorized to indicate in-campus access only
You can not download at the moment.
Your IP address is 184.108.40.206
The defense date of the thesis is 2004-08-19
The current date is 2020-01-18
This thesis will be accessible at off-campus not accessible
URN etd-0819104-143343 Statistics This thesis had been viewed 2911 times. Download 22 times. Author Jui-Chun Jao Author's Email Address No Public. Department Communication Engineering Year 2004 Semester 2 Degree Master Type of Document Master's Thesis Language English Page Count 50 Title MODELING OF IEEE 1394 HIGH SPEED CONNECTOR Keyword IEEE 1394 HIGH SPEED CONNECTOR HIGH SPEED CONNECTOR IEEE 1394 Abstract In this thesis, we established the SPICE model of the IEEE 1394.A connector. We also explain the procedure of TDR measurements to get the SPICE model by importing the importing result to the package software IPA510. Then importing the SPICE model to the package software Microwave Office by feeding a pulse train in the SPICE modelvarification can be carried out. Finally, comparing with the result of the measurements by feeding a pulse train generated from Tektronix DG2040 DATA GENERATOR to the physical structure-IEEE 1394.A connectors, farther comparison is done. The simulation of the equivalent model using package software Microwave Office shows good agreement with the measurements. Therefore, the accuracy of this proposed is very promised.
Besides, we set up the connector model in the package software CONCERTO and compare the time-domain simulation result with TDR measurement of the physical structure-IEEE 1394.A connectors. The comparing result shows that the characteristic impedance trend is similar, although there is 20 ohm mismatch with each other. Some discussion about it are listed in the chapter 6.
Advisor Committee Chi-Fang Huang - advisor
The-Nan Chang - co-chair
Tzong-Lin Wu - co-chair
Files Date of Defense 2004-07-29 Date of Submission 2004-08-19